Glass Repair Service

Got fogged, cracked, or broken window glass? In many cases, you can replace just the glass—no need to change the whole window. As a family‑owned St. Louis dealer for 28+ years, we offer clear, repair‑first options that balance performance and price. No pressure—just straight answers at The Intersection of Price and Quality®.

Call 314‑353‑8350 or request a quick, no‑pressure estimate. Prefer to compare options? We’ll walk you through glass‑only replacement, seal fixes, or when a different repair is the best long‑term value for your home.

• Phone: 314‑353‑8350
• Hours: Mon–Fri, 8:00 a.m.–4:00 p.m.; Closed Sat–Sun
• Showroom: 7530 Watson Rd, Shrewsbury, MO 63119

Not sure which service you need? Start here for fast guidance and next steps. Or read a quick primer on options in Replacement Window Glass Options Explained for Homeowners.

Why windows fog or crack—and how glass‑only replacement works

Most residential windows use insulated glass units (IGUs): two or three panes with a spacer and a sealed edge. When that edge seal fails, air and moisture get between the panes. You’ll see fog you can’t wipe away, a cloudy film, or droplets that appear and disappear with temperature swings—and your insulation drops too.

Cracks and breaks can result from impact or stress, including rapid temperature swings common in Missouri. Safety glazing is required by code in certain spots (in and near doors, bathrooms, or close to the floor). Learn more: What is tempered glass and when is it required?

Good news: you often don’t need a whole new window. If your frame and sash are sound and square, glass‑only replacement lets us remove the failed or broken IGU and install a new, custom‑made unit in your existing frame—often faster and at a lower cost than full replacement.

You can also upgrade performance at the same time with Low‑E coatings and argon gas fills. Learn more: What is Low‑E glass? and Argon vs. Krypton.

Our process

1. Assessment and measurement: We confirm whether glass‑only repair is the right fit, verify any safety‑glass needs, and take precise measurements for thickness, size, spacer color, grids, and any tint or privacy patterns. Why accurate measurements matter.
2. Clear, written quote: You’ll see line‑item pricing. When helpful, we compare glass‑only vs. full replacement and note energy‑upgrade options.
3. Order and scheduling: Your custom pane/IGU is fabricated to size. We keep you posted on ETA.
4. Installation and cleanup: We install the new glass, reassemble, verify operation, and leave the area clean—then review basic care and operation. How pros prevent leaks and water intrusion.

Typical turnaround is about 1–3 weeks for standard double‑pane IGUs; specialty items (tempered, laminated, triple‑pane, shapes) may take longer. Have a tight timeline? Call 314‑353‑8350 and we’ll review options.

Pricing and value

Every quote is tailored and explained in plain language—so you know exactly what you’re paying for and why. Main cost factors include:

• Glass size, shape, and thickness
• Low‑E coatings or tint
• Tempered safety requirements (bathrooms, near doors/stairs, etc.)
• Grids or muntins between the glass
• Double‑ vs. triple‑pane insulated glass units (IGUs)

Why repair can save money: If frames are solid and operate well, replacing the glass or IGU usually costs far less than replacing the entire window—keeping your trim and exterior look intact while restoring clarity and comfort. Looking for seasonal savings? See our current Specials.

Energy‑efficient upgrades when you replace glass

• Low‑E glass: Cuts summer heat gain, winter heat loss, and UV that fades interiors. See more: Protecting floors and furniture.
• Gas fills: Argon is the common, cost‑effective choice; krypton can help in tighter airspaces. Compare gases.
• Double vs. triple pane: Double‑pane with Low‑E/argon fits most needs; triple‑pane can further improve U‑factor and condensation resistance. See the trade‑offs.
• ENERGY STAR note: ENERGY STAR labels apply to complete windows (frame + glass). Glass‑only replacement improves comfort but doesn’t change the original label. Details: ENERGY STAR and replacement.

Concerned about traffic or neighborhood noise? See Do Replacement Windows Reduce Outside Noise?

Repair vs. replace: honest guidance

Glass‑only repair is usually right when:

• You see fog/haze from a failed seal, or a cracked/broken pane
• Frames and sashes are structurally sound and operate properly
• You want to keep existing trim and finishes intact

Consider full window replacement when:

• Frames/sashes are rotted, swollen, or won’t seal
• Chronic drafts or very inefficient, outdated windows persist
• Parts are obsolete and can’t be serviced reliably

Exploring replacement? Visit our Replacement Windows hub and compare insert vs. full‑frame methods, or browse our Windows & Doors overview.

Worried about interior finishes during a replacement project? Here’s what to expect: Will Window Replacement Damage Interior Trim or Drywall?

Warranties, safety, and compliance

Quotes include written manufacturer glass/IGU warranties. Your installation is covered by Viviano’s workmanship warranty—if an installation‑related issue arises within the stated period, we make it right. Ask for sample warranty language with your estimate.

We schedule licensed and insured installers and carry workers’ compensation. Learn more: Do installers carry workers’ compensation insurance?

For homes built before 1978, we follow EPA RRP lead‑safe practices (containment, HEPA filtration, proper cleanup). Details: Lead‑paint regulations.

Service area, showroom, and how to reach us

We serve homeowners across the St. Louis metro—city and suburbs. Share your window glass concern, and we’ll recommend the most cost‑effective fix and schedule professional installation. If your frames are in good shape, we focus on glass‑only solutions to save you money. See examples of recent installations in Our Work.

Showroom: 7530 Watson Rd, Shrewsbury, MO 63119. Open Mon–Fri, 8:00 a.m.–4:00 p.m. Bring photos and rough sizes for faster guidance.

Contact: Call 314‑353‑8350 or request a Free Estimate. Family‑owned for 28+ years, we keep it simple—no commissioned sales, just clear options and value‑focused advice.

Glass repair FAQs

• Can you replace just the glass in a double‑pane window?
  Yes—if the frame is sound, we replace the insulated glass unit (IGU) to fix broken, cracked, or fogged glass. Upgrades like Low‑E and argon are available.
• How long does it take from measurement to install?
  Most standard double‑pane IGUs are ready in about 1–3 weeks; tempered, tinted, triple‑pane, or shaped units can take longer. See: Typical turnaround.
• Can you match my existing grids or tints?
  Often, yes. We usually match common grid patterns, between‑the‑glass grids, and popular tints; we’ll confirm options during your estimate.
• Will the replacement meet safety code?
  Yes. We specify tempered safety glass where required by code. Learn more: Tempered glass and When codes require tempered.
• Do you offer financing?
  Ask about available plans for qualifying projects: Financing options.
• What happens to the old glass?
  We remove and dispose of failed or broken units safely and leave your space clean. For larger projects: Old windows after replacement.

Ready to restore clarity?

Talk with a friendly, no‑commission advisor. We’ll confirm whether a glass‑only fix makes more sense than a full window replacement and provide clear, line‑item pricing before you decide.

Call 314‑353‑8350 or Get My Free Estimate

View Current Specials

Prefer to stop by? Visit our showroom at 7530 Watson Rd, Shrewsbury, MO 63119. Open Mon–Fri, 8:00 a.m.–4:00 p.m.